Application Instructions
Also viewable in PDF format

I. SURFACE PREPARATION
All surfaces must be considered dirty and must be cleaned prior to the application of markings. Recommended cleaning procesdures for specific surfaces are listed below.

A. Plastic & Glass
Saturate a clean cloth with a 2 to 1 misture of water and isoprpyl alcohol and wipe the surface. (Cleaners such as Windex Window Cleaner may be used.) Wipe the surgace dry with a clean, dry, lint-free cloth.

B. Painted Metal & Base Metals
There surfaces must be cleaned with a solvent such as: E.I. Dupont Prep-Sol Cleaning Solvent 39195. Xylol, VM&P Naphtha or Lacquer Thinner. Dry the surface with a lint-free cloth before the solvent evaporates. Freshly painted surfaces must be dried one week prior to application.

C.Interior Painted Surface
Paint must be dried one week prior to application of markings. Clean the area where the marking are to be applied with a household cleaner such as 409. Rinse thoroughly and dry.

II. TEMPTERATURE REQUIREMENTS
Air and application surface temperatures must be above 40 degrees F for GSP 220 Scotchcal products and 55 degrees F for GSP 280 Scotchlite products.

III. APPLICATION INSTRUCTIONS